Axeon TF Series Polyamide Thin Film Composite Home Drinking Water Reverse Osmosis Membrane, 50 gpd Permeate Flow Rate, 2 - 11 pH Range Check Price Now

Price :$23.95 Product Description The Axeon TF-series membrane elements offer high quality water for residential use. The TF-series will fit standard 2 x 12 RO membrane housings and have an indefinite shelf life. These are highest performing membrane elements that deliver consistent quality and performance. TF-series residential reverse osmosis polyamide-thin film composite membranes offer reliability, high performance and deliver consistent results for higher quality water. 98 percent nominal salt rejection. Improved system performance. Superior quality and cost savings. Individually vacuum tested. Axeon residential membranes operate as low as 50 psi and can yield up to 23 percent more water than other membranes at 65 psi. This Membrane Element is Tested and Certified by NSF International against NSF/ANSI Standard 58 for material requirements only. 50 gpd permeate flow rate. 98.00 percent stabilized salt rejection. 50 psig supplied pressure. 113 degree F maximum operating temperature. 150 psi maximum operating pressure. 2  gpm maximum feed flow rate. 2-11 pH Range, continuous operation. 1-13 pH Range - short term cleaning (30 minutes). 5 maximum SDI. Less than 1 maximum turbidity. 0 ppm chlorine tolerance. Thin film composite membrane type. Spiral wound configuration. Maximum temperature for continuous operations above pH10 is 95 degree F. 1-Year limited warranty. Offers high quality product water Can operate as low as 50 psi, while producing more water than competing membranes 98 percent nominal salt rejection Produces 50 gallons per day Made from polyamide thin-film composite